| Material | PLA+ | src (1) |
| Nozzle and layer height | 0.4 mm nozzle at 0.2 mm layers, or 0.6 mm nozzle at 0.4 mm layers | src (1) |
| Infill density | 15% | src (1) |
| Supports | Everywhere, ignoring slopes over 45° to the horizontal; none in screw holes with horizontal axes | src (1) |
| Accuracy check | Print Gauge_0 and Gauge_tight_1 (STS3215) or the Lego gauges before the parts | src (1) |
| Print files | One tray per arm; Ender (220x220), Prusa/UP (205x250) and Bambu Lab A1 mini variants under STL/SO101/ | src (2) |
| After printing | Scrape parts off with a putty knife; remove supports with a small screwdriver | src (2) |