14
Connect the forearm to the motor 3 horns Loading 3D view…
3D view needs JavaScript; every instruction is in the text.
Fit the forearm over motor 3's horns Horn. The metal disc that fits on the end of a motor; printed parts screw onto it. Each motor ships with two, one with gear teeth around its edge for the driven end and one plain disc for the other end.Source: waveshare.com · lerobot/docs/source/so101.mdx#joint-1 wire slot Wire slot. A channel printed into a part for the motor cable to lie in. Turn the part so the channel is on the side the cables run down.Source: waveshare.com src Screw it to the horns with 4 M3x6 M3x6. A screw size. M3 means a 3 mm thread, 6 means 6 mm long. It has a machine thread and goes into the threaded holes of a horn; the same size holds each printed part to its horn.Source: mantech.co.za · lerobot/docs/source/so101.mdx#joint-1 src lerobot/docs/source/so101.mdx#joint-3 — "Connect the forearm to motor 3 using 4 M3x6mm screws on each side." check — 4 M3x6 on each side; forearm wire slot on the same side as the cable run. Done when 4 screws on each side; the forearm's wire slot is on the cable side.
lerobot/docs/source/so101.mdx#joint-3 "Connect the forearm to motor 3 using 4 M3x6mm screws on each side." waveshare.com Follower step 10: wire slot of F6 on the same side as the wiring harness SO-ARM100/STEP/SO101/SO101 Assembly.step placement check (viewer/public/geometry/placements.json): Under_arm_SO101 encloses 50% of servo 3: the forearm on the motor-3 horns Orientation: Wire slot of the forearm on the same side as the wiring harness (Waveshare).
Check: 4 M3x6 on each side; forearm wire slot on the same side as the cable run.
Motor slot: elbow_flex · ID 3 · STS3215 1:345 ·
7.4V servo on a 5V supply; 12V servo on a 12V 5A+ supply (optional variant);
How we placed it: Part role confirmed by placement in the upstream assembly STEP: Under_arm_SO101 encloses 50% of servo 3: the forearm on the motor-3 horns.
You need Forearm Under arm (forearm) under-arm-so101 details STS3215 motor, 1:345 gear, code C001 Feetech STS3215 servo, 7.4V, 1:345 gear (C001) servo-sts3215-c001-345 approximation3D stand-in Stand-in shape: the 3D geometry or placement is not measured from the real part.
Qty 7 is the two-arm build (6 follower + 1 leader). A 12V variant with 30 kg.cm stall exists for the follower only and needs a 12V 5A+ supply (README). Includes two horns and a 3-pin cable per the assembly texts; kit contents are not itemised upstream. Geometry: the upstream repo's own simplified body `STEP/SO100/STS3215_03a.step` (Apache-2.0, single solid drawn to the datasheet, D-007 for where they differ) with its fused horn plates cut off and the datasheet ø6 x 3.4 output boss added, posed on the embedded vendor model's transform; the vendor mesh is not redistributed.
details M3x6 screw M3x6 screw m3x6 ×8 details Phillips screwdriver #0 · PH0 tool details Phillips screwdriver #1 · PH1 tool details Sources (3) How we placed it Part role confirmed by placement in the upstream assembly STEP: Under_arm_SO101 encloses 50% of servo 3: the forearm on the motor-3 horns.